PD030 30 m ingaas photodiode features ? planar structure ? very high speed ? low dark current ? dielectric passivation ? 100% purge burn-in applications ? 10gb/s optical receivers ? test and measurement PD030-003-0xx ceramic sub-mount PD030-003-1xx to can package product description the PD030 is an ingaas photodiode with a photosensitive region 30 m in diameter. it is intended for use in very high speed, low noise communication systems (up to 10gb/s data rates) and for use in optical test and measurement equipment. planar semiconductor design and dielectric passivation provide low noise performance. reliability is assured by hermetic sealing and 100% purge burn-in (200c, 15 hours, vr = 20v). the device can be assembled on a ceramic sub- mount or in a to can. it can be pigtailed with sc, fc, or st connectors (upc or apc). it can also be mounted in an sc, st of fc receptacle. custom packages are an option. electrical characteristics table 1: electrical specifications parameter min typ max unit dark current (i d ) - 0.1 1.0 na capacitance (ceramic sub-mount) (1) - 0.27 0.32 pf capacitance (to can) (1) - 0.4 0.5 pf responsivity at 1310nm (ceramic sub-mount) 0.80 0.90 - a/w responsivity at 1550nm (ceramic sub-mount) 0.85 0.95 - a/w responsivity at 1310nm (t o can) 0.80 0.85 - a/w responsivity at 1550nm (t o can) 0.85 0.90 - a/w 3db bandwidth (50 ?) (ceramic sub-mount) (1) 9000 11000 - mhz 3db bandwidth (50 ? ) (to can) (1) 5800 7200 - mhz operating voltage - 5 20 v (1) 5v bias voltage
PD030 rev 1.0 2 table 2: absolute maximum ratings parameter min max unit forward current - 2 ma reverse current - 100 a reverse voltage - 30 v optical input power - 5 mw operating case tem perature -40 +85 oc storage temperature -40 +85 oc soldering temperature (10 seconds) - +250 oc stresses in excess of the absolute ra tings may cause permanent damage. functional operation is not implied under these conditions. exposure to absolute ratings for extended periods of ti me may adversely affect reliability. ordering information part number options PD030-003-0xx custom defined si ze and electrical layout PD030-003-1xx package: to46, to56, impedance controlled to46 number of pins: 2, 3 cap: window, lens, sapphire. ar / non-ar coated. cap plating: gold or nickel please contact anadigics for the specific part number and pinout that suits your needs anadigics, inc. 829 flynn road camarillo, california 93012, u.s.a. tel: +1 (805) 445-4500 fax: +1 (805) 445-4502 url: http://www. anadigics.com e-mail: mktg@anadigics.com i mportant notice anadigics, inc. reserves the right to make changes to its pr oducts or discontinue any product at any time without notice. t he product specificat ions contained in advanced product information sheets and preliminary data sheets are subject to change prior to a product?s formal intr oduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibility for inaccura cies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. warning anadigics products are not intended for use in life support appliances, devices, or systems. use of an anadigics product in any su ch application without written consent is prohibited.
|
